Moss and Mould Remover

Attach your garden hose and spray affected areas.  The black and red on/off valves are off when in the vertical position.  The black circle valve needs to be turned on (horizontal position) for the liquid to come out of the bottle.  The red circle valve needs to be turned on (horizontal position) for the hose water to spray.  Depending on the water pressure, you should get a 3-metre or more water spray from the nozzle.  Adjust pressure if necessary using a red on/off valve and/or garden tap.  When happy with a 3 metre or more water spray exiting the nozzle, turn the black valve to the full-on position.  The area being sprayed will now start to show a white foam.  Cover the area in a wide sweeping motion, saturating the area with the product.  Hint: do not spray in windy conditions as the product will drift.  Do not allow products to enter or contaminate fish ponds, drains, or waterways.

Roofs:  If on tank water, disconnect the supply and allow four weeks with a minimum of 6mm rain over this period before reconnection.

Pets:  Keep animals off the treated surface until the product has dried.  Wash paws with fresh water if affected to avoid licking.

Reaction time:  You should see a change in the colour of moss/mould/lichen within one to two weeks.  This means the moss/mould/lichen has been killed and has died.  The natural effect of the weather (wind and rain) will wash the surface sprayed, clean.  Badly contaminated surfaces may take 6 to 12 months to come clean.  If the cleaned surface is not exposed to rainfall or is vertical, some assistance may be required to remove the dead growth.